Table of Contents
Advertisement
Observe the following matters if putting your hands or part of body into a
moving part of the machine in such cases of feeding production materials,
changing production models, or adjustments.
You may potentially be injured if the machine is actuated.
And also you may potentially receive an electric shock.
There are three levels of steps as follows, to each kind of work.
Repairing such as a control BOX ---------------------------------
Turning OFF the power supply routinely ---------------------------
Replacing a control part such as a sensor
Disassembling or replacing parts
Changeover or working for daily check ----------------------------
Setting the nozzles in the nozzle changer
Maintenance of the inside of the machine
Turn OFF the servo
switch, and then open
the safety cover.
Rear panel
STOP
UNLOCK
START
STEP
LIGHT ON
SELECT
KEY LOCK
BACK LIGHT OFF
SERVO
OFF (
) ON (
)
Stop the air supply.
SMC PRESSURE
MPa
OUT
SET
4Z4C-823E
M73B
Page 4
WARNING
E64C-AC00
Cut off the power supplying to
this machine.
Turn OFF the power and stop
the air supply.
Lock the power supply switch
and the main air valve.
Turn OFF the servo switch, and
then open the safety cover.
Cut off the power supplying
to this machine.
Turn OFF the breaker that
is connected to the
machine.
Turn OFF the power supply.
Turn OFF the servo switch,
and then open the safety
cover.
Front panel
START
STOP
UNLOCK
STEP
LIGHT ON
SELECT
KEY LOCK
BACK LIGHT OFF
SERVO
OFF (
) ON (
)
E64C-E-XXA00-A03-00
Hide quick links:
Advertisement
Table of Contents
