Air Cleaner Element; Cylinder Head Cover - Suzuki GA413 Service Manual

AIR CLEANER ELEMENT

REMOVAL AND INSTALLATION
1) Remove air cleaner case clamps.
2) Remove air cleaner element from case.
3) Check air cleaner element for dirt.
4) If necessary, blow off dust by compressed air from air outlet side
of element.
If excessively dirty, replace element.
5) Reverse removal procedure for installation.
1. Air cleaner case
2. Clamp

CYLINDER HEAD COVER

REMOVAL
1) Disconnect negative (–) and positive (+) battery cables at bat-
tery terminal and remove battery.
2) Remove ignition coil assemblies with high-tension cord.
3) Disconnect PCV valve and breather hose from head cover.
4) Remove cylinder head cover with cylinder head cover gasket
and O-rings.
1. Cylinder head
cover
2. Cylinder head
cover gasket
3. O-rings
INSTALLATION
1) Install O-rings and cylinder head cover gasket to cylinder head
cover.
NOTE:
Be sure to check each of these parts for deterioration or
any damage before installation and replace if found defec-
1 Cylinder head
tive.
cover gasket
2. O-rings
3. Cylinder head
cover
ENGINE MECHANICAL 6A-9