Aop Settings - Siemens SINAMICS G130 Operating Instructions Manual

Note
No recording of data
The values displayed in the recorder are not recorded and saved, they are only used for
display until the screen form is exited.
5.5.4

AOP settings

Control settings
This defines the settings for the control keys in LOCAL mode (see "Operation / Control via
the operator panel / Operation via the operator panel").
Display settings
In this menu, you set the lighting, brightness, and contrast for the display.
Define operation screen
In this menu, you can switch between five operation screens. You can set the parameters to
be displayed.
Figure 5-6 Define operation screen
Advanced Operator Panel 30 (AOP30)
Operating Instructions, 11/2017, A5E00331451A
Control via the operator panel
5.5 Menu commissioning / service
31