LG D005KD1N111 Operating Manual page 3

CAUTION
y This product is intended for residential use only and should not be used for commercial or
industrial.
y Before testing electrical parts inside the system, it takes at least 10-minute standby period of
time to complete discharging the system.
y The contents included in this box are power conditioning system and its accessories, and the
entire weight amounts to over 25 kg. Serious injury may occur due to the heavy weight of
the product. Therefore, special care must be taken in handling. Make sure to have at least two
persons deliver and remove the package.
y Do not use the damaged, cracked or frayed electrical cables and connectors. Protect the
electrical cables from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door or walked upon. Periodically examine the electrical cables of your product, and
if its appearance indicates damage or deterioration, discontinue use of this product, and have
the cables replaced with an exact replacement part by a qualified personnel.
y Ensure that you connect the earth ground wire to prevent possible electric shock. Do not try
to ground the product by connecting it to telephone wires, lightning rods or gas pipes.
y The product should not be exposed to water (dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the product.
y To prevent fire or electric shock hazard, do not expose this production to rain or moisture.
y Do not block any ventilation openings. Ensure reliable operation of the product and protect it
from over heating. The openings shall never be blocked by placing any object on this product.
y The temperature of metal enclosure may be high during operation.
y In order to avoid radio-interference, all accessories (like a energy meter) intended for
connection to the product shall be suitable for use in residential, commercial and light-industry
areas. Usually this requirement is fulfilled if the equipment complies with the class B limits of
EN55022.
y The product must be disposed of according to local regulations.
y The electrical installation of this unit must only be performed by LGE service person or trained
installer, qualified to install PCS.
y If the AC circuit breaker is turned off and the PCS is not operated for a long time, the battery
may be overdischarged.
y Connect the DC+ and DC- cables to the correct DC+ and DC- terminals on the product.
Indicates a situation where damage or injury could occur. If
it is not avoided, minor injury and/or damage to property
may result.
Getting Started 3
1