Cleaning; Separating The Parts Of The Device; Cleaning The Frying Basket And The Pan; Cleaning The Hot Air Fryer And The Handle - Silvercrest SHF 1500 A1 Operating Instructions Manual

Hot air fryer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22

8. Cleaning

DANGER of burns!
Let the hot air fryer 12 cool down be-
fore you move, empty or clean it.
DANGER! Risk of electric
shock!
Pull out the mains plug 13 from the wall
socket before cleaning the hot air fryer.
The hot air fryer 12 must not be im-
mersed in water.
WARNING! Risk of material dam-
age!
None of the parts may be cleaned in a
dishwasher.
Prevent water from entering the handle 9.
Do not use any sharp or abrasive clean-
ing aids.
8.1 Separating the parts of
the device
1. Figure A: use the handle 9 of the fry-
ing basket to pull the pan 10 and the
frying basket 6 out of the device.
2. Place the complete, cooled-down unit
on a level, non-slip surface.
3. Figure B: grasp the handle 9 and
push the safety catch 7 forward and
press the release button 8 down.
4. Figure B: while pressing the release
button 8, lift out the frying basket 6.
The pan 10 remains standing.
5. Figure B: grasp the handle 9 and lift
out the frying basket 6. The pan 10 re-
mains standing.
30 GB
8.2 Cleaning the frying
basket and the pan
1. Pour out any liquid from the pan 10.
2. Remove coarse dirt residues from the
frying basket 6 and the pan 10.
3. Wash the frying basket 6 and the pan 10
by hand with very warm water and a
mild detergent.
4. Rinse with clear water.
5. Let all parts dry completely before you
put them away or use the device again.
8.3 Cleaning the hot air fryer
and the handle
1. Wipe off the hot air fryer 12 and the
handle 9 of the frying basket with a
damp cloth using a mild detergent.
Make sure that no water gets into the
device 12.
2. Then wipe with a damp cloth without
detergent.
3. Let all parts dry completely before you
put them away or use the device again.

9. Storage

• Before putting the hot air fryer 12
away, make sure that
- the mains plug 13 has been pulled
out,
- the device has cooled down and
- all parts are completely dry again.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents