Download Print this page

Troubleshooting - LG CM-200 User Quick Manual

2.4ghz smartlink. 4-way navigation wireless laser mouse

Advertisement

Power Saving Function (Option)
You may continuously press the link button and then press the scroll button to turn off
the optical sensor.
Notification
Ÿ This equipment is intended for use in the following countries.
28 European Countries:
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Hungary, Germany, Greece, Iceland, Ireland, Italy , Latvia, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain,
Sweden, Switzerland and United Kingdom.
Ÿ The LED indicator on the receiver or the mouse, or the mouse scroll wheel will light
while the mouse is low battery. Please recharge or change the batteries immediately.
Ÿ Please do not use the mouse during charge periods.
Ÿ Scroll the wheel to wake up the mouse while the mouse is in the sleeping mode.
Ÿ New Laser Device with 800-dpi High Resolution: provides the most reliable and
accurate movement and is 20 times as sensitive as any traditional optical sensor.
Please avoid using the mouse on any reflective surfaces such as glasses and mirrors.
Ÿ Please avoid using the mice under the following conditions.
- Direct sunlight
- Extreme hot, cold, dusty or magnetic environment
- Near by fax machine, television, radio, mobile phone or any wireless device
- Metal surface
Ÿ If the wireless product is malfunction, please change or recharge the batteries, or
move the receiver away from the computer and the monitor.
Trouble Shooting
Question 1: No mouse movement.
Solution:
1) Make sure the software that you are using supports a mouse.
2) Check that mouse is plugged into serial port at the back of computer.
3) Ensure that mouse driver is installed into system.
Question 2: The cursor on the screen remains at one spot or moves erratically.
Solution:
1) Check the mouse cable for any breaks or sharp twists. Examine the cable closely
where it connects to the mouse.
Question 3: The cursor movement stops at a corner and no longer responds to the
mouse movement.
Solution:
1) Run the mouse driver to check which mode the mouse is operating in.
2) If the mouse is wireless, please check the battery power or re-link the mouse.
Question 4: Mouse movement does not produce corresponding cursor movement or
there is a brief pause during movement.
Solution:
1) Check the connecter or the cables of the mouse and the receiver if there is any break
or tangled.
4-way Navigation Wireless Laser Mouse
- 4 -

Advertisement

loading