Setting A Password - LG FG Manual

2-3. Setting a password

If you want to protect the system setup from unauthorized users, follow the instruction
below to set a password.
You can set a password in the CMOS Setup Utility program.
If you forget the password, you cannot gain access to your system. Be sure to
write down the password in a safe place only you can refer to in case you forget
the password.
1. Start the CMOS Setup Utility. Use the arrow keys to select Advanced BIOS
Features, and then press Enter.
2. Use the arrow keys to select Security Option. Use the Page Up and Page Down
keys to select Setup or System, and then press Esc.
Note
If you select Setup in the Security Option, the computer asks for a password next time
you try to enter the CMOS Setup Utility. If you select System, the computer asks for a
password next time you start the computer and also when you try to enter the CMOS
Setup Utility. Setting the System password prevents unauthorized users from using
the computer or changing the system setup.
3. Use the arrow keys to select Set Password, and then press Enter.
CMOS Setup Utility-Copyright(C) 1984-2001 Award Software
Advanced BIOS Features
Quick Boot Enabled
Anti-Virus Protection Disabled
CPU L1&L2 Cache Enabled
Fast Boot Enabled
1st Boot Device CD-ROM
2nd Boot Device Floppy
3rd Boot Device HDD-0
Boot Other Device Enabled
Swap Floppy Disabled
Seek Floppy Disabled
Security Option Setup
MPS Table Version 1.4
Boot OS/2 for DRAM > 64MB No
Hard Disk S.M.A.R.T Disabled
Full Screen LOGO Show Enabled
Summary Screen Show Disabled
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:Help F5:Previous Values F7:Optimized Defaults
Item Help
Menu Level
Select whether
Password is required
every time the system
boots or only when
you enter setup
System setup 15