Panasonic WJ-ND300 Maintenance Manual page 5

WJ-ND300 SATA conversion guide (single)
(7) Release the radiator fan cable from two cord clamps attached to the HDD Fan Ass'y, and disconnect respective Junction connectors,
and remove the HDD Fan Ass'y.
(8) Remove five screws (3x wafer-head screw, 2x screw with
washer) fixing the HDD Fan Ass'y and then remove the
HDD Fan Ass'y.
(9) Remove six screws (wafer-head screws) fixing the HDD
unit guide rail, and remove three HDD unit guide rails.
Panasonic
FAN1
wafer-head
screw
5
Maintenance guide
FAN2
screw with washer
HDD Fan Ass'y
six wafer-head
screws
HDD unit guide rail
ND300_SATAConversionGuideS_A
wafer-head
screw