Dell EqualLogic FS7610 Series Hardware Owner's Manual page 21

Dell EqualLogic FS7610 Hardware Owner's Manual 2 Replacing Components
2. Push up on the release latch on the left side of the bezel and carefully pull out the bezel from the left side of
the chassis (callout 1).
3. Move the bezel to the left to disengage it from the right side of the chassis (callouts 2 and 3).
Figure 12: Removing the Bezel
Attaching the Bezel
To attach the bezel, see Figure 13 and follow these steps:
1. Insert the right side of the bezel into the slot on the right side of the chassis (callout 1).
2. Push the bezel toward the left side and engage the bezel with the left side of the chassis (callout 2).
3. Use the key to lock the bezel (callout 3).
Figure 13: Attaching the Bezel
15