Setting Your Phone's Security; Accessing The Security Menu; Locking Your Phone; Unlocking Your Phone - Sanyo Sprint SCP-7000 Operating Manual

Setting Your Phone's Security

Accessing the Security Menu

You must enter your lock code to view the Security menu.
To access the Security menu:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Security and press MENU/OK.
4. Enter lock code.
Tip: If you can't recall your lock code, try using the last four digits of either your Social Security
number or wireless phone number or try 0000 or NATL (6285).

Locking Your Phone

When your phone is locked, you can only receive incoming calls or make calls to 911 and special
numbers.
To lock your phone:
1. From the Security menu (See "Accessing the Security Menu" above), select Lock Phone and
press MENU/OK.
2. Select Lock Now or On Power-up and press MENU/OK.
3. Depending on your preference, select either Full Lock or Excp. Incom. Calls and press
MENU/OK.
Full Lock to disable both the outgoing and incoming calls.
●
Excp. Incom. Calls to disable the outgoing calls but enable incoming calls.
●
Tip: If you want to cancel the "On Power-up" setting before turning the phone off, select
Unlocked during step 2 above.

Unlocking Your Phone

To unlock your phone:
1. Press Unlock (left softkey).
2. Enter your lock code.

Changing the Lock Code

To change your lock code:
1. From the Security menu (See "Accessing the Security Menu" above), select Others and
press MENU/OK.
2. Select Change Lock and press MENU/OK.
3. Enter and re-enter your new lock code.
32