Canon Finisher-R1 Installation Procedure page 19

is not used for a long time. Once you have removed the plate and its fixing screws, it is a good idea to store
them away for future use.
1) Remove the 7 screws [1], and detach the lower right cover [2].
2) Remove the fixing screw [1], and detach the releasing plate (front) [2].
3) Remove the fixing screw [1], and detach the releasing plate (rear) [2].
[2]
[1]
F-1-15
[1]
F-1-16
[1]
[2]
Chapter 1
11