Siemens SINAMICS S120 Getting Started page 17

7. Click on button "Diagnosis" in the "Set PG/PC interface" window.
8. Click on button "Test".
9. Click on "Read".
10. Click on "OK" in order to close the diagnosis window.
11. Click on "OK" to exit from the "Set PG/PC interface" window.
Getting Started
Getting Started, 11/2009, 6SL3097-4AG00-0BP0
The diagnosis window opens as well. Check the function and settings of the interface in
this window.
The status of the PROFIBUS interface is displayed.
The status of the connected stations is displayed according to the legend.
Creating a drive project
3.1 Setting the communications interface
17