Flow Chart For Installer Setup Mode; Master/Slave Setting - LG AC Ez Installation & Owner's Manual

INSTALLATION INSTRUCTION
14

Flow chart for Installer setup mode

Press
Enter installation

(Master/Slave setting)

Enter installation
(Group 1 setting)
Enter installation
(Group 2 setting)
Is it set with Master?
Enter installation
NO
(Connected indoor unit setting)
Enter installation
(Changing °C/°F)
NOTE
!
In each installation mode, if you press the
ting condition.
If you press the
tion mode.
button for 5 seconds.
Entry Installation mode
mode #1
Press button shortly
mode #2
Press button shortly
mode #3
Press button shortly
YES
mode #4
Press button shortly
mode #5
button, it is returned before setting condition and exits from installa-
: Master/Slave setting
: 'Group 1 ' product setting
(Air conditioner or Ventilator)
: 'Group 1 ' Group number setting
: 'Group 2' product setting
(Air conditioner or Ventilator)
: 'Group 2' Group number setting
: Temperature display setting (°C/°F)
button, it is operated or saved current set-