Owner's Instruction; Group Selection; Control Range Selection - LG AC Ez Installation & Owner's Manual

OWNER'S INSTRUCTION

Group selection

1
Select the group to control and display by pressing "GROUP SELECT" button. When
pressing "GROUP SELECT" button, Group 1 and Group 2 is changed in turn.
2
When pressing "GROUP SELECT" button, LED is turned on as set group and displayed
corresponding current condition by using LCD and LED.
NOTE
!
• In case of Eco-V DX, it is possible to control and display in ventilation group.

Control range selection

Select product range to control by pressing
button.
Selected product range is changed as following by pressing
(UNIT → GROUP→ ALL → UNIT)
C Set central controller of slave is changed as following. (UNIT→ Group → UNIT)
NOTE
!
When selecting GROUP ALL , controlled indoor unit condition at the latest is displayed in
LCD. If you control in this condition, all indoor units of selected product range is changed
equally. When selecting all group condition, if it doesn't have any button input for 20 sec-
onds, it returns individual unit selection mode automatically.
INSTALLATION INSTRUCTION
• UNIT : Individual indoor unit
• GROUP : Connected indoor units of corresponding group
• All : Connected indoor units of all groups (same type product only)
button.
21