Portedge - HP 16500C Programmer's Manual

INTermodule Subsystem

PORTEDGE

PORTEDGE
Command :INTermodule:PORTEDGE <edge_spec>
This command does not obey the truncation rules.
The PORTEDGE command sets the Port In BNC to respond to either a rising
edge of falling edge for a trigger from an external source. The threshold level
of the input signal is set by the PORTLEV command.
A 1 or ON for rising edge or a 0 or OFF for falling edge.
<edge_spec>
Example
OUTPUT XXX;":INTERMODULE:PORTEDGE 1"
Query
:INTermodule:PORTEDGE?
The PORTEDGE query returns the current edge setting.
Returned Format
[:INTermodule:PORTEDGE] {1|0}<NL>
Example
OUTPUT XXX;":INTERMODULE:PORTEDGE?"
13–12