All - HP 16500C Programmer's Manual

TGTctrl Subsystem

ALL

ALL
Query :TGTctrl:ALL<N>?
The ALL query returns all parameters of the signal specified by <N>. These
values may be individually queried using other commands in the TGTctrl
subsystem.
An integer, 0 through 7.
<N>
Returned Format
[:TGTctrl:ALL<N>] <on>,<name>,<type>,<bits>,<drive>,<last>,
<current>,<state0>,<state1>,<state2>,<state3>,<state4>,
<state5>,<state6>,<state7><nl>
<on>
{0|1}
A string of up to 14 characters
<name>
<type>
{0|1|2}
pulse, and 2 indicates a sequence.
An integer, 0 through 255, whose binary form indicates the signal's bit mask.
<bits>
A value of 1 means the bit is turned on.
<drive>
{0|1}
indicates open collector.
An integer, 1 through 7, indicating last state.
<last>
An integer, 0 through 7, indicating current state.
<current>
An integer, 0 through 255, whose binary form indicates the value put out
<state0> –
when the signal is in that state. Values occurring after the last state are not
<state7>
significant.
Example
OUTPUT XXX;"TGT:ALL0?"
See Also SIGNal, NAME, TYPE, BITS, DRIVe, LASTstate, CURSTate, and STATEs
commands in this chapter.
14–6
0 indicates signal is not active, 1 indicates signal is active.
indicating type of output signal. 0 indicates toggle, 1 indicates
indicating output type. A value of 0 indicates normal (TTL), and 1