Power-On/Power-Off Sequence; To Power On Hp 16600A And Hp 16700A-Series Logic Analysis Systems; To Power On All Other Logic Analyzers - HP 16600A Series User Manual

Power-on/Power-off Sequence

Listed below are the sequences for powering on and off a fully
connected system. Simply stated, your target system is always the last
to be powered on, and the first to be powered off.
To power on HP 16600A and HP 16700A-series
logic analysis systems
Ensure the target system is powered off.
1 Turn on the logic analyzer. The Setup Assistant will guide you
through the process of connecting and configuring the analysis
probe.
2 When the analysis probe is connected to the target system and
logic analyzer, and everything is configured, turn on your target
system.

To power on all other logic analyzers

With all components connected, power on your system in the following
order:
• Logic analysis system.
• Your target system.
Solutions for CPU32
Chapter 3: Connecting and Configuring the Analysis Probe
Power-on/Power-off Sequence
39