To Configure The Processor Type - HP 16600A Series User Manual

Chapter 6: Connecting and Configuring the Emulation Module
Configuring the Emulation Module

To configure the processor type

Processor type configuration
Value Built-in command
68330 cf proc=68330
68331 cf proc=68331
68332 cf proc=68332
68333 cf proc=68333
68334 cf proc=68334
68335 cf proc=68335
68336 cf proc=68336
68338 cf proc=68338
68340 cf proc=68340
68341 cf proc=68341
68349 cf proc=68349
68360 cf proc=68360
68376 cf proc=68376
683xx cf proc=683xx
68hc16z1 cf proc=68hc16z1
68hc16z2 cf proc=68hc16z2
68hc16y1 cf proc=68hc16y1
The cfsave -s command will store this configuration in the
emulation module's flash memory. The cfsave -r command will
restore this configuration.
If you are using a processor in your target that is not listed as a choice,
the emulator can provide direct access to all the registers defined in
the CPU32 architecture programming model but will not have direct
access to memory mapped registers in the processor's internal
modules.
If you are using a processor that is listed as a choice, the emulator will
have knowledge of on-chip peripheral registers and SIM registers and
150
Notes
CPU32 Processor Types
Use for other CPU32 processors
CPU16 Processor Types
Solutions for CPU32