HP 16600A Series User Manual page 181

Chapter 8: Using the Emulator with a Debugger
Setting up Debugger Software
To change the port number of an emulator
Some debuggers do not provide a means to specify a port number. In
that case, the debugger will always connect to port 6470 (the first
emulator). If you need to connect to another module, or if the port
number of the first module has been changed, you must change the
port number to be 6470.
To view or change the port number:
1 Click on the emulation module icon in the system window of the
logic analysis system, then select Update Firmware.
2 Select Modify Lan Port...
3 If necessary, enter the new port number in the Lan Port Address
field.
The new port number must be greater than 1024 and must not already
be assigned to another emulator.
180 Solutions for CPU32