To install the emulation module in an
HP16700A-series logic analysis system or an
HP16701A expansion frame
You will need T-10 and T-15 Torx screw drivers (supplied with the
module).
1 Turn off the logic analysis system and REMOVE THE POWER
CORD.
Remove any other cables (including mouse or video monitor cables).
2 Turn the logic analysis system frame upside-down.
3 Remove the bottom cover.
4 Remove the slot cover.
You may use either slot.
Solutions for CPU32
Chapter 6: Connecting and Configuring the Emulation Module
Installing the Emulation Module
135