To Manually Define Sim Values - HP 16600A Series User Manual

Chapter 7: Using Internal Registers (SIM and EMSIM Registers)
Configuring SIM Register Values
2 Break the target processor.
Some registers can only be written once after processor reset.
If you set the EMSIM values, then reset and break, the EMSIM values will be
written to the SIM registers. If your initialization code then attempts to write to
one of the "write once after reset" registers, the writes will fail. In this case, you
must run from reset to correctly execute the initialization code.

To manually define SIM values

Using the Emulation Control Interface:
1 Open the Registers window.
2 Enter the values for the registers.
Once you have entered the values, it is a good idea to copy the SIM
values to the EMSIM registers and save a configuration. Then you will
be able to reload the SIM registers without typing all the values again:
3 In the Configuration window, click the
button.
4 Open the Workspace window and select
Configuration...
166
.
Read Configuration
File©Save
Solutions for CPU32