To Install The Emulation Module In An Hp16600A-Series Logic Analysis System - HP 16600A Series User Manual

To install the emulation module in an
HP16600A-series logic analysis system
You will need T-8, T-10, and T-15 Torx screw drivers (supplied with the
emulation module).
1 Turn off the logic analysis system and REMOVE THE POWER
CORD.
Remove any other cables (such as probes, mouse, or video monitor).
2 Slide the cover back.
3 Remove the slot cover.
Solutions for CPU32
Chapter 6: Connecting and Configuring the Emulation Module
Installing the Emulation Module
137