HP 16600A Series User Manual page 185

Chapter 8: Using the Emulator with a Debugger
Using the Green Hills debugger
Using the Green Hills debugger
Compatibility
Version 1.8.8.A of the MULTI Development Environment from Green
Hills Software, Inc. is one of several debuggers which connect to the
HP emulation module.
This section provides information that is specific to using MULTI with
the HP emulation module. It is intended to be used in conjunction with
the MULTI documentation provided by Green Hills Software.
Overview
MULTI connects to an emulation module through the Green Hills host-
resident program (hpserv).
Host computer
MULTI
Getting started
1 Check that your Emulation Module is programmed with firmware
for a CPU32 processor.
Go to the system window of the logic analyzer interface and verify that
the Emulation Module icon is described as a "Motorola CPU16/32 BDM
Emulator". If it is not, follow the instructions on page 144 to update
the firmware.
2 Build the executable.
If you have the demo software shipped with the Green Hills debugger,
184
hpserv
Logic analysis
system with
emulation
module
Target
Solutions for CPU32