HP 16600A Series User Manual page 208

Chapter 9: Using the Analysis Probe and Emulation Module Together
trigger from the logic analyzer.
To disable the processor stop on trigger, select Trace©Disable -
Break Emulator On Trigger.
3 Click
Group Run
window).
4 If your target system is not already running, click
emulation Run Control window to start your target.
To stop the processor when the logic analyzer
triggers (Intermodule window)
Use the Intermodule window if you do not have the HP B4620B Source
Correlation Tool Set or if you need to use a more sophisticated trigger
than is possible in the Source Viewer window.
1 Create a logic analyzer trigger.
2 In the Intermodule window, click the emulation module icon,
then select the analyzer which is intended to trigger it.
The emulation module is now set to stop the processor when the logic
analyzer triggers.
Solutions for CPU32
Triggering the Emulation Module from the Analyzer
in the Source window (or other logic analyzer
in the
Run
207