HP 16600A Series User Manual page 7

Connecting and Configuring the Analysis Probe 36
Target System Requirements 37
Analysis probe-circuit board dimensions 38
Power-on/Power-off Sequence 39
To power on HP 16600A and HP 16700A-series logic analysis systems 39
To power on all other logic analyzers 39
To power off 40
Connecting the Analysis Probe to the Target System 42
To connect the transition board 43
To connect the analysis probe to the probe adapter 44
Connecting the probe adapter to the target system 45
Connecting the Analysis Probe to the Logic Analyzer 49
To connect the high-density termination cables to the analysis probe 50
Connecting the high-density cables to the logic analyzer 51
To connect to the HP 16600A logic analyzer 52
To connect to the HP 16601A logic analyzer 54
To connect to the HP 16602A logic analyzer 56
To connect to the HP 16603A logic analyzer 58
To connect to the HP 16550A analyzer 60
To connect to the HP 16554/55A/56/57D analyzers 63
To connect to the HP 1660A/AS/C/CS/CP logic analyzers 65
To connect to the HP 1661A/AS/C/CS/CP logic analyzers 67
To connect to the HP 1662A/AS/C/CS/CP logic analyzers 69
To connect to the HP 1670A/D logic analyzer 71
To connect to the HP 1671A/D logic analyzer 73
To connect to the HP 1672A/D logic analyzer 75
Configuring the Analysis Probe 77
To set the ID switches 78
To interpret the LEDs 79
Configuring the analysis probe for address reconstruction 81
To configure with a debugger 81
To configure with a logic analysis system 82
Configuring the Logic Analysis System 83
To load configuration and inverse assembler files-HP 16600/700 logic analysis
6 Solutions for CPU32