HP 16600A Series User Manual page 177

Chapter 8: Using the Emulator with a Debugger
Using the Emulator with a Debugger
Minimum requirements
To use a debugger with the emulator, you will need:
• A debugger which is compatible with the emulator
• A LAN connection to the PC or workstation that is running the debugger
• X windows or an X terminal emulator, such as Reflection X on a PC. This is
required only if you wish to have the logic analysis system user interface
displayed on your PC or workstation screen, along with the debugger.
Is your debugger compatible with the emulator?
Ask your debugger vendor whether the debugger can be used with an
HP emulation module or HP emulation probe (also known as a
"processor probe" or "software probe").
LAN connection
You will use a LAN connection to allow the debugger to communicate
with the emulator.
Compatibility with the Emulation Control Interface
Do not use the logic analysis system's Emulation Control Interface and
your debugger at the same time.
176 Solutions for CPU32