Siemens Milltronics MUS Operating Instructions Manual page 16

Installing/mounting
4.2 Conveyor Considerations
①
②
③
④
⑤
⑥
⑦
Note
The vertical displacement of the head pulley relative to the adjacent retreat idler is
normally in excess of that which is acceptable for belt scale installations.
When locating the scale close to the head pulley, a maximum of 13 mm (½") vertical
displacement between the top of the head pulley and the top of the center of the adjacent
roll is allowed.
①
②
③
14
7
45º idlers
Minimum 5 idler spaces
Head pulley
20º idler
35º idler
45º idlers
Belt scale
13 mm (1/2") maximum
Head pulley
20° idler, center roll
Operating Instructions, 06/2012, 7ML19985CQ02-02
Milltronics MUS