Table of Contents
Advertisement
Installing/mounting
4.4 Installation precautions
4.4
Installation precautions
The following precautions should be observed when handling the scale.
● Do not pry on the idler, its mountings, or the cells directly.
● Do not stand or lean on the scale.
● Avoid shock from blows of a hammer when trying to position the scale during installation.
● Do not lift the scale by its idler.
● Do not lift the scale by the idler mounting brackets.
Note
For general safety and best system performance, the belt scale must be grounded
through the conveyor and the conveyor must be grounded to earth.
Arc welding
Use extreme caution when arc welding in the area of the belt scale. Ensure that no welding
current can flow through the belt scale. Welding currents passing through the scale can
functionally damage the load cells.
18
CAUTION
Operating Instructions, 06/2012, 7ML19985CQ02-02
Milltronics MUS
Advertisement
Table of Contents
