Setting The Motor Current; Setting The Current Limiting Value - Siemens SIRIUS 3RW30 Manual

Commissioning
13.2 Commissioning the 3RW40
13.2.7

Setting the motor current

I potentiometer
e
The rated operational current of the motor must be set with the I
the mains voltage and the motor connection (wye-delta). The electronic motor overload
protection also refers to this set value if it is active. For the permissible settings referred to
the required motor overload trip class, refer to chapter Motor current settings (Page 120).
13.2.8

Setting the current limiting value

xI potentiometer
e
Representation valid for 3RW40 S0, S2,
S3 up to product version E06, and
3RW40 S6 and S12 up to product ver-
sion E10.
The current limiting value is set with the xI
current as a factor of the set rated motor current (I
114
e
Representation valid for 3RW40 S0, S2, S3
for product version E07 and higher, and
3RW40 S6 and S12 for product version E11
and higher.
potentiometer to the maximum required starting
e
).
e
Manual, 10/2018, NEB535199502000/RS-AB/005
potentiometer according to
SIRIUS 3RW30 / 3RW40