Operator Controls, Displays, And Connections On The 3Rw40 - Siemens SIRIUS 3RW30 Manual

Operation

11.2 Operator controls, displays, and connections on the 3RW40

11.2 Operator controls, displays, and connections on the 3RW40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
82
Operating voltage (three-phase mains voltage)
Control supply voltage
IN start input
ON / RUN output
BYPASSED output
DEVICE / STATE / BYPASSED / FAILURE status LEDs
OVERLOAD, RESET MODE status LEDs
TEST / RESET button
Current limiting
Ramp-up time
Starting voltage
Ramp-down time
Trip class
Motor current
Thermistor input (can be optionally ordered with 24 V AC/DC control voltage for 3RW402. to
3RW404. devices)
Fault output
Motor terminals
RESET MODE button (behind the label on the 3RW402., refer to the diagram below)
SIRIUS 3RW30 / 3RW40
Manual, 10/2018, NEB535199502000/RS-AB/005