Rear Panel - Sony DVCAM DSR-60P Operating Instructions Manual

Location and Function of Parts Features
7 MONITOR SELECT switches
Use these switches to select the channels for audio
output via the MONITOR AUDIO connector on the
rear panel and the HEADPHONES connector on the
front panel.
Use the left switch to select the basic channel setting,
then use the right switch to select the output format
(monaural, stereo, or mix).
The table at right lists the correspondence of left/right
switch settings and channel/output format selections.

Rear Panel

REF.VIDEO
TIME CODE OUT
AC IN
1 AC IN connector
Connect to an AC power outlet using the supplied
power cord.
2 TBC (time base corrector) REMOTE connector
(15-pin)
To remote-control the built-in time base corrector,
connect an optional TBC remote controller such as the
UVR-60/60P, BK-2006/2007 or BVR-50/50P.
12
Chapter 1 Overview
ANALOG I/O
QSDI
VIDEO OUT
COMPONENT VIDEO
AUDIO OUT
S VIDEO OUT
MONITOR
AUDIO
1 AC IN connector
2 TBC REMOTE connector
3 REMOTE connector
Switch setting Selected channel and output format
Left Right HEADPHONES
switch switch connector
Channel 1 only
CH- CH-
1/3 2/4
(monaural)
MIX
Channels 1 and 2
CH- CH-
CH- CH-
1/3 2/4
1/2 3/4
(stereo)
MIX
Channel 2 only
CH- CH-
1/3 2/4
(monaural)
MIX
Channel 3 only
CH- CH-
1/3 2/4
(monaural)
MIX
Channels 3 and 4
CH- CH-
CH- CH-
1/3 2/4
1/2 3/4
(stereo)
MIX
Channel 4 only
CH- CH-
1/3 2/4
(monaural)
MIX
1 Analog video signal input/
2 Digital signal output section
SDI OUTPUT
3 Analog audio signal output
TBC REMOTE REMOTE
Notes
• Be sure to power off this unit before connecting the
TBC remote controller to the TBC REMOTE
connector.
• Only analog outputs (outputs of the connectors 4,5
and 6in 1 analog video signal input/output section)
can be controlled remotely.
3 REMOTE connector (9-pin)
When controlling this unit from an editing controller
such as the ES-7, PVE-500, BVE-600/800/910, or
RM-450/450CE, connect the unit to the editing
controller via this connector using the supplied 9-pin
remote control cable.
MONITOR AUDIO
connector
Channel 1 only
(monaural)
Channels 1 and 2
(mix)
Channel 2 only
(monaural)
Channel 3 only
(monaural)
Channels 3 and 4
(mix)
Channel 4 only
(monaural)
output section (see page 13)
(with the optional DSBK-100/
100P and DSBK-110/110P
installed) (see page 14)
section (see page 14)