Rear Panel - Sony SVO-5800 Operating Instructions Manual

Rear Panel
The illustration below shows the SVO-5800/S800P.
REMOTE 9P connector
TBC REMOTE (Time Base Corrector remote)
connector (15-pin)
AC IN connector
S VIDEO IN connector (4-pin) (SVO-5800/5800P only)
S VIDEO OUT 1, 2 connectors (4-pin)
COMPONENT VIDEO OUT connector (BNC type)
Use the SVBK-170 component output board (not supplied)
to output video signals (Y, R-Y, B-Y).
TIME CODE IN connector (BNC type)
(SVO0-5800/5800P only)
VIDEO IN connectors (BNC type) and 75-ohm
termination switch (SVO-5800/S800P only)
inputs a composite video signal. Two connectors
are made loop-through.
REF VIDEO IN (reference video Input)
connectors (BNC type) and 75-ohm
termination switch
Inputs a reference video signal. Two connectors
are made loop-through.
MONITOR VIDEO output connector (BNC
type)/AUDIO monitor output connector
(phono jack)
The time data and settings of the internal
menu are superimposed and output through
the MONITOR VIDEO connector.
VIDEO OUT connector (BNC type)
Outputs a composite video signal.
TIME CODE OUT connector (BNC type)
Identification of Parts and Contros
9(E)
Identificatio of Parts and Controls | | | | | | | | | | | | | | |