Room Ventilation; Precautions To Be Taken For The Lights; Cleaning The Windows And The Rear-View Mirrors - Checking The Windshield Wiper Blades - Komatsu PC110R-1 Operation & Maintenance Manual

2.3.4 ROOM VENTILATION

• Before starting the machine in confined or poorly ventilated
places, provide for proper ventilation or connect the engine ex-
haust pipe to a suction duct. The engine exhaust gases can be
deadly.

2.3.5 PRECAUTIONS TO BE TAKEN FOR THE LIGHTS

• Remove any trace of dirt from the lights, in such a way as to ensure perfect visibility on the work area.
• Make sure that all the working lights and bulbs are functioning properly. If necessary, replace faulty bulbs with
new ones, making sure that the power is correct.
2.3.6 CLEANING THE WINDOWS AND THE REAR-VIEW MIRRORS -
CHECKING THE WINDSHIELD WIPER BLADES
• Remove any trace of dirt from the cab windows and clean the rear-view mirrors, in order to ensure perfect visibil-
ity on the work area.
• Adjust the rear-view mirrors that may have moved, so that the operator seated in the driving position can clearly
see the area behind the machine.
If any glass is damaged, replace it with a new one.
• Check the conditions of the windshield wiper blades; the scraping wire must be smooth, with no indentations and
attached to the rubber back of the blade.
In case of doubts on the efficiency of the scraping wire, change the blades.
PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE
RWA01050
31