Hitachi Compute Rack 220H Replacement Manual page 62

Removing a fan
1. Turn off power to the system and peripherals.
See Powering off system unit
2. Slide out the system from the rack cabinet.
See Sliding out the system unit from a rack cabinet
3. Remove the front top cover of the system.
See Removing the front top cover
4. Check which fan slot you need to remove the fan module from.
5. Grasp the fan, press the release latch of fan, and then lift it out of straight
upward.
Figure 4-10: Remove a fan
4-10 Replacing parts
Hitachi Compute Rack 220H CRU Replacement Guide
on page 3-4.
on page 3-7.
Release latch
on page 3-5.