Troubleshooting When Warnings Occur; Ink Check; (W01000, W01001, W01002, W01003, W01004, W01005); Mtcart Full Soon - Canon W6200 Service Manual

W6200

7.2 Troubleshooting When Warnings Occur

Codes in parentheses are not displayed when a warning occurs. These codes can be
checked in the warning history by using SERVICE MODE>DISPLAY>WARNING.
7.2.1

Ink Check

(W01000, W01001, W01002, W01003, W01004, W01005)

<Cause>
This is displayed when the electrodes mounted to the hollow needle in the ink tank
unit detect that the ink is below the prescribed level.
<Probable problem locations>
Ink tank, ink tank unit, engine controller, system controller
<Remedy>
1.Check the ink level.
2.Replace the ink tank.
3.Check the connectors of the ink tank unit.
4.Replace the ink tank unit.
5.Replace the engine controller.
6.Replace the system controller.
7.2.2

MTCart Full Soon

(W01006)

<Cause>
This is displayed when an almost full (80 percent or more) maintenance cartridge is
detected.
<Probable problem locations>
Maintenance cartridge, engine controller and system controller
<Remedy>
1.Maintenance Cartridge
Use SERVICE MODE>COUNTER>PRINTER>W-INK to check the waste ink
absorber. Replace if the waste ink level is near the limit (1000ml).
2.Replace the engine controller.
3.Replace the system controller.
5-45
Part 5: Maintenance