W6200
3.2 Firmware Confirmation
Firmware has been downloaded to each of a System Controller and Engine Controller.
When replacing each board with the one with Service Parts, confirm that each firmware
is the latest version. If it is not the latest version, please update it to the latest version.
REF.
3.3 Precautions Against Static Electricity
Certain clothing may generate static electricity, causing an electrical charge to build up
on your body. Such a charge can damage electrical devices.
To prevent this, discharge any static buildup by touching a grounded metal fitting
before you start disassembling the printer.
3.4 Precautions for Disassembly/Assembly
The Parts Catalog describes the disassembly/assembly procedures. See the Parts
Catalog when assembling/disassembling the printer. The precautions for
disassembly/assembly are described in
3.5 Self-Diagnostic Feature
The printer has a diagnostic feature which analyzes printer problems (which may
occur).
The diagnostic results will be displayed on the display and indicated by a light.
For detailed information, see
3.6 Disposing of Waste Ink
Dispose of the waste ink according to local regulations.
3.7 Disposing of Lithium Battery
Dispose of the lithium battery according to local regulations.
NOTE
For how to upgrade each board, please refer to
SOFTWARE.
Part 3: 4.2 Error Indicators.
The engine controller and the system controller of this printer each uses a
lithium battery. The lithium battery for the engine controller is a non-
replaceable part and the lithium battery for the system controller is a
replaceable part.
Part 1: Safety and Precautions
Part 3: 6. PRINTER SERVICE
Part 5: 5. DISASSEMBLY/REASSEMBLY.
1-13