Rack Requirements - Dell EqualLogic PS4000 Series Instructions Manual

Specification
Weight of fully loaded array
Operating temperature
Storage temperature
Maximum operating altitude
Operational relative humidity
Storage relative humidity
Thermal output (fully-loaded array)
Operational shock
Operational vibration
Input voltage
Input frequency
System input power
Each power supply
Chassis dimensions

Rack Requirements

Make sure the rack and the array installation meet the following requirements:
•
Use an industry-standard (for example, CEA-310-E), four-pole, 19 inch (48.3 cm) rack.
•
The rack must be rated for 540 kg (1200 pounds) static load or greater.
•
The minimum rack depth is 100 cm (40 inches) from the front of the rack to the rear of the rack.
•
The distance between the inside of the front and rear rack poles (the mounting surfaces) must be
61 cm (24 inches) to 90 cm (36 inches).
•
Secure the rack to the floor for added stability.
•
Load a rack with arrays from the bottom to the top.
•
There must be at least 4.1 cm (1.6 inches) between the rack door and the front of the array to
accommodate the array front bezel.
•
The rack (with installed arrays) must meet the safety requirements of UL 60950-1 and IEC 60950-1.
•
Mount the array in a horizontal position, or you will void your array warranty and support contract.
2
Table 1: PS4000 Array Specifications
Value
35 kg (77.6 lb)
5 to 35 °C (41 to 95 °F)
-30 to 60 °C (-22 to 140 °F)
3048 meters (10,000 feet)
20% to 80% noncondensing
5% to 80% noncondensing
1700 BTU/hour (SAS disks)
1550 BTU/hour (SATA disks)
5g peak 1/2 sin, for 10ms
.21 G 5 to 500 Hz Random
rms
100 to 240 VAC (auto-sensing)
48 – 62 Hz
530 VA (maximum)
450 watts DC output
Maximum input power: 0.7 KVA
Input current: 7 – 3.5A
13 cm by 48.26 cm by 55.1 cm
(5.12 in. by 19 in. by 21.7 in.)
PS4000 Rack Mount Instructions