Rail Kit Parts; Tool Requirements - Dell EqualLogic PS4000 Series Instructions Manual

Rail Kit Parts

The rail kit includes the parts described in Table 2. Not all parts are used in all racks.
•
Parts for round racks are included in bag labeled ROUND.
•
Parts used in multiple racks are included in the bag labeled COMMON.
•
No additional parts are required for tapped racks.
Item Graphic
1
2
3
4
5
7

Tool Requirements

You need the following tools to mount an array in a rack. These tools are not provided in the array
shipping box.
•
#2 Phillips screwdriver
•
#2 pozidriv® screwdriver
•
(Optional) Torque wrench. The torque specification for the supplied screws is 5.69 N m (4.2 foot
pounds).
PS4000 Rack Mount Instructions
Table 2: Rail Kit Parts (Images Not to Scale)
Quantity Description
1 each LH Rail Assembly
RH Rail Assembly
2 M5 x 8 Posi pan head screw
with patchlock (COMMON bag)
4 Large O/D plain washer
(COMMON bag)
4 Spring washer (COMMON bag)
4 #10-32 x 25 Phillips head NO2
pan head screw (COMMON
bag)
8 Locator pins for round hole rack
(ROUND bag)
3