Recording A Programme - Sony DCR-IP5E/IP7E Operating Instructions Manual

Recording a
programme
When using the A/V connecting
cable
You can record or edit a programme from
another VCR that has video/audio outputs. Use
your camcorder as a recorder.
1 Switching the video input jack of
the A/V connecting cable
The supplied A/V connecting cable is equipped
with an S video plug and a video plug. You have
to select one of the jacks in the menu settings.
The default setting is VIDEO. If the setup is not
necessary, go to "2 Making a recording" on
page 104.
(1) Set the POWER switch to VCR.
(2) Select FN, then press the centre z on the
control button. The PAGE1 screen appears.
(3) Select MENU, then press the centre z on the
control button. The menu appears.
(4) Select VIDEOINPUT via
centre z or B on the control button.
(5) Select VIDEO or S VIDEO, then press the
centre z on the control button.
(6) Press DISPLAY to turn off the menu. Pressing
DISPLAY again displays the video control
buttons.
2
3
4,5
VCR SET
VIDEOINPUT
RETURN
, then press the
FN
MENU
VIDEO
1
(1)
(2)
(3)
z
(4)
(5)
(6)
VCR SET
VIDEOINPUT VIDEO
S VIDEO
RETURN
2
z B
z
6
1
POWER
CAMERA
MEMORY/ (CHG)
NETWORK
OFF
VCR
ON
MODE
z
103