Step 3 Inserting A Cassette - Sony DCR-IP5E/IP7E Operating Instructions Manual

Step 3 Inserting a
(1) Install the battery pack, or connect the AC
power adaptor for the power supply (p. 25 to
31).
(2) Slide OPEN/ZEJECT in the direction of the
arrow and open the cassette lid. The cassette
compartment automatically lifts up and
opens.
(3) Push the middle portion of the back of the
cassette to insert it. Insert the cassette in a
straight line deeply into the cassette
compartment with the window facing out.
(4) Close the cassette compartment by pushing
down the cassette lid halfway. The cassette
compartment automatically goes down.
(5) After the cassette compartment goes down
completely, close the lid until it clicks.
2
OPEN/ZEJECT
To eject the cassette
Follow the procedure above, and take out the
cassette in step 3.
Notes
•Do not press the cassette compartment down
firmly. Doing so may cause a malfunction.
•Before you open the cassette lid, be sure to
disconnect the A/V connecting cable, i.LINK
cable, and USB cable (DCR-IP7E only). If you
open the cassette lid without disconnecting the
cables, the cables or plugs of the cables may be
damaged.
36
cassette
3, 4
(1)
(2)
Z
(3)
(4)
(5)
5