Refitting the lower door
Pull hinge pin complete with
washer and adjusting foot
upwards to remove.
Remove stopper .
Undo screws and remove hinge
plate .
Unscrew hinge part from hinge
plate , turn it 180°, and screw it into
the opposite hole in the hinge plate.
Insert stopper into the other hole.
Remove cover .
Remove screw and screw it into
the outermost hole on the opposite
side.
Turn cover through 180° and refit it
on the opposite side.
Screw hinge plate onto the
opposite side, using only the outer
two slots. Do not use the screw in the
middle because otherwise you will
not be able to align the appliance
door with the outer slots later on.
Important! Screw adjustable foot
into hinge pin as far as it will go.
Changing the door hinging
Reinsert hinge pin complete with
washer and adjustable foot .
Important! The lug on the hinge pin
must point to the back again.
Place the lower door on hinge pin
from above.
Close the lower door.
In the middle of the appliance, insert
hinge pin through hinge plate
and into the lower appliance door.
77