Table of Contents
Advertisement
Replace panel onto the soft-close
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
Close the upper door.
Changing the door hinging
Refitting the handle
Danger of damage!
The door seal can be damaged if the
handle is fitted incorrectly.
Please make sure you follow the
instructions below carefully when
you refit the handle.
Loosely attach the handle to the
opposite side of the door with the
two front screws .
The mounting plate must be
positioned on the door housing so that
when the door is closed it is flush with
the outer wall of the appliance.
Firmly tighten all 4 screws .
From the appliance side, slide the
sidebar into the guide on the
mounting plate until it audibly clicks
into place.
Make sure that sidebar does not
come into contact with the door seal
when the door is opened. This can
cause permanent damage to the door
seal.
81
Advertisement
Table of Contents
