Bosch e-GoKart PowerTrain Young Star Manual page 45

Bosch Motorsport
Connections of the wiring harness
Middle / Top
Relay Housing
Illustration 43: 12 V wiring harness "connector information"
– left side
– Battery 1 "batt_1"
– 12 V Battery "12V & GND"
– Remote HW "rte_spedlim"
– Brake pressure sensor "p_brake"
– middle/top
– Charger CAN "charge_CAN"
– Brake light "brake_sw"
– DC/DC converter "DC/DC"
– steering wheel
– Display Unit DDU 18 connector "SP/stear"
– Display Unit DDU 18 remote connector "rte_DDU"
– front side
– Acceleration pedal sensor "s_accped"
– Brake inductive sensor "p_brake"
– right side
– Battery 2 "batt_2"
– ON / OFF switch "open end wiring" (See Figure)
– Neutral / Drive switch "open end wiring" (See Figure)
– SOC-LEDs "LED SOC_1"; "LED SOC_2"; "LED SOC_3"; "LED SOC_4"
– Key switch "open end wiring"
e-GoKart_Powertrain__Young_Star__Manual
Wiring Harness instruction / Build up chassis | 6
Left Side
Right Side
Front Side
Display
Power Unit
Steering Wheel
45 / 60