Table of Contents
Advertisement
Appendix A Precautions and Restrictions
A.6 Precaution on Installing an OS on the Fujitsu 3.2 TB Flash Accelerator Card
Note - The phrase "after a certain amount of time has elapsed" has the following meaning:
(1) The 15-minute period after the elapse of "24 days, 20 hours, 16 minutes, and 23.648
seconds" (25th day) from physical partition (PPAR) power-on
(2) The 15-minute period after the elapse of above time (1) and the elapse of a multiple of time of
"24 days, 20 hours, 31 minutes, and 23.648 seconds" (50th day, 75th day, and so on)
A.5.1
Workaround
Apply XCP 2330 or later.
A.5.2
Corrective Action After Occurrence
If the system does not stop at the ok prompt, apply break to the target domain to stop at an ok prompt. After
15 minutes have passed, execute the boot command again.
A.6
Precaution on Installing an OS on the Fujitsu 3.2
TB Flash Accelerator Card
Installation of an OS on the Fujitsu 3.2 TB Flash Accelerator Card may cause the following message to be
output, and the card may not appear as an OS possible installation destination.
WARNING: Fail to attach: 8192 page size is not supported by the controller.
A.6.1
Workaround
To install an OS on the Fujitsu 3.2 TB Flash Accelerator Card, use an OS installation image with Oracle
Solaris 11.3 SRU 28.4 or later already applied.
You can create the OS installation image by using distro_const.
For details on creating a custom Oracle Solaris 11 installation image for Oracle Solaris 11.3, see the
Creating a Custom Oracle Solaris 11.3 Installation Image.
A.6.2
Corrective Action After Occurrence
None
10
C120-0067-02EN
Advertisement
Table of Contents
