Settings; Selecting The Reception Channel - Sony WRR-850A Operating Instructions Manual

Settings

Selecting the Reception Channel

22
You can select the reception channel and set the muting level, the
reference level, etc., by following the instructions below.
Take the following precautions to prevent interference and noise.
• Do not simultaneously use two or more microphones and transmitters
that are set to the same channel.
• When simultaneously using two or more tuners, always set the tuners to
different channels within the same group.
• Separate the reception antennas and the transmitter by more than 2
meters (6 ft. 4 in.).
1
S
MONITOR
1
LEVEL
POWER
MIN MAX
ØON øOFF
1
Press the POWER switch.
The power is turned on.
Note
Press the POWER switch after reducing the volume of equipment
connected to the TUNER OUTPUT as noise will be heard if the power
is turned on or off beforehand.
2
Press the GP button and hold it down.
The tuner changes to the group selection mode, and the GP indicator
flashes.
2 3,5
1 2
FREQ
RF RF
2
AF AF
OUTPUT
NO. MUTING GP CH NO. MUTING
LEVEL
4
00 6 801
GP CH
FREQ
OUTPUT
GP CH
LEVEL
UHF SYNTHESIZED DIVERSITY TUNER WRR-850
(continued)