Yamaha CS-700 Operation Manual page 108

set mute 0
notify audio.mute 0
Supported Products: CS700-AV, CS700-SP, CS700-DL, CS700-DS
camera-ptz-home
Description: PTZ settings for the default home position. When the CS-700 detects that an USB
connection has been established to a computer, either at startup or after a previous USB
disconnection, it will revert to the PTZ home settings. Calling set on this property will move
the camera to the newly defined PTZ position.
Property Actions: set, get, notify
Default Value: 0 0 1
Command Definition:
Action Definition
get camera-ptz-home
get
val camera-ptz-home <"pan"> <"tilt"> <"zoom">
response
set camera-ptz-home <"pan"> <"tilt"> <"zoom">
set
notify camera.camera-ptz-home <"pan"> <"tilt"> <"zoom">
notify
Parameters:
Parameter
-30..30
-18..18
1..22
CLI Format Examples:
get camera-ptz-home
val camera-ptz-home 0 0 1
set camera-ptz-home 0 0 1
notify camera.camera-ptz-home 0 0 1
Supported Products: CS700-AV, CS700-SP, CS700-DL, CS700-DS
camera-image-defaults
Description: Camera image default settings. The settings impacted by this property are Backlight,
Brightness, Contrast, Saturation, Sharpness, Hue, and Gamma. The order of the parameters
is relevant. None of the parameter can be left out.
The Camera image defaults are not automatically applied when setting these values. To
apply the values call the cam-image-apply-defaults property.
Description
Pan setting (default value is 0)
Tilt setting (default value is 0)
Zoom setting (default value is 1)
108