Yamaha CS-700 Operation Manual page 90

Property Type
sys.power-saving- BOOLEAN
mode
sys.power-saving- NUMBER
time
sys.provisioning- NUMBER
interval
sys.snmp-enable BOOLEAN
sys.snmp- TEXT
community
sys.snmp-contact- TEXT
name
sys.snmp-device- TEXT
location
sys.snmp-address TEXT
sys.recent-call- BOOLEAN
enabled
sys.ui-mask NUMBER
audio.eq NUMBER
Values
0 : Power save mode is off
1 : Power save mode is on
timeout : Power save timeout in
minutes
1..44640 : Provisioning interval
in minutes
0 : Disable SNMP
1 : Enable SNMP
Read-only community string.
Contact name.
Device location.
IP address or DNS name.
0 : Disable recent call list
1 : Enable recent call list
0 : All menus are enabled in the
dialer
4 : Do not allow modifications of
call forwarding
8 : Do not allow modifications of
call history
16 : Do not allow modifications
of contacts
32 : Do not allow modifications
of DND
1 : Voice
2 : Bass boost
3 : Treble boost
Default Value Description
1 Configure the power saving mode setting.
20 Configure power saving time in minutes.
1440 (1 day) Specify the provisioning interval for the device, in minutes. The
maximum interval is 44640 (31 days).
0 Enable or disable SNMP support. Disabled (0) means that SNMP is
not supported. Enabled (1) means that SNMP is available.
public Specifies the SNMP read-only community string used for queries
from the server and transmitted traps. Read-only indicates the
authorization level. The device does not support write operations
initiated through SNMP.
Specifies the contact name, typically the system administrator.
This string is informational and can include an email address. It is
not associated with traps.
Specifies the location of the device for informational purposes.
Specifies the SNMP server address to which traps will be sent.
Leave blank to disable traps.
1 Enables or disable the Recent Calls list.
0 Enable or disable menus in dialer via a bit mask. Add the values of
all features that are to be disabled. For example a value of 40
(8+32) will not allow modifications to the call history, and does not
allow modification of the DND.
1 EQ setting used to adjust the speaker frequencies to your
preference for the room and the types of calls.
90