Hitachi KP-FD140GV Operation Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Security Camera
  5. KP-FD140GV
  6. Operation manual

Hitachi KP-FD140GV Operation Manual

Hide thumbs Also See for KP-FD140GV:
Table of Contents

Advertisement

Quick Links

Download this manual
CCD camera
KP-FD140GV
KP-FD83GV
KP-FD33GV
KP-F140GV
KP-F83GV
KP-F33GV
O p e r a t i o n M a n u a l
Thank you for purchase this fine Hitachi Kokusai
Electric CCD camera.
Before using the camera, please read this operation
manual carefully and keep this manual on file for
ready reference in the future.
Hitachi Kokusai Electric Inc.
RoHS Compliant
These products comply with the requirement of
the RoHS (Restriction of the use of Certain
Hazardous Substances in Electrical and electronic
Equipment) Directive 2002/95/EC.
September 19, 2008 Version 1.06

Advertisement

Table of Contents
loading

Related Manuals for Hitachi KP-FD140GV

Summary of Contents for Hitachi KP-FD140GV

  • Page 1 KP-F33GV O p e r a t i o n M a n u a l RoHS Compliant Thank you for purchase this fine Hitachi Kokusai These products comply with the requirement of Electric CCD camera. the RoHS (Restriction of the use of Certain...
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the product and the operating instructions should be adhered to. 4.
  • Page 6 Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a.When the power-supply cord or plug is damaged. b.If liquid has been spilled, or objects have fallen into the product. If the product has been exposed to rain or water. d.If the product does not operate normally by following the operating instructions.
  • Page 7 Dieses Erzeugnis sollte nur an der auf dem Typenschild angegebenen Stromversorgungsart betrieben werden. Wenn Sie nicht sicher sind, was für eine Stromversorgung Sie haben, so wenden Sie sich bitte an Ihren Erzeugnishändler oder an das lokale Elektrizitätswerk. Beziehen Sie sich für Batteriebetrieb oder andere Stromquellen vorgesehene Erzeugnisse bitte auf die Bedienungsanleitungen.
  • Page 8 2. Conserver ces instructions Conserver les instructions de sécurité et de fonctionnement á des fins de référence ultérieure. 3. Tenir compte des avertissements Tous les avertissements qui figurent sur l’appareil et dans le mode d’emploi devront être respectés. 4. Observer les instructions Observer toutes les instructions de fonctionnement et d’utilisation.
  • Page 9 WARNING Changes or modifications not expressly approved by Hitachi Denshi responsible for compliance could void the user’s authority to operate the equipment.
  • Page 10 ・ Sop using the camera at the approach of electrical storm (thunder audible). Protect the camera from rain if using it outdoors. ・ In event the camera shows any abnormality, switch off the camera and disconnect the power cord. Contract a Hitachi Denshi service representative.
  • Page 11 wires. 6. Cleaning ・ Use a blower or a lens brush to remove dusts on the lens or the optical filter. ・ Wipe dirts on the case off with dry soft cloth. If dirks are hardened, wipe them off with cloth moistened with neutral detergent liquid;...

  • Page 12: Table Of Contents

    Table of Contents 1. Overview ··········································································································································································································· 1 2. Standard Composition ················································································································································································ 1 3. Features ············································································································································································································ 1 4. Section name and functions ···································································································································································· 2 5. Camera mounting ·························································································································································································· 2 6. Lens ····················································································································································································································· 2 7. Optical filter ····································································································································································································· 3 8. Connector ········································································································································································································· 4 9.

  • Page 13: Overview

    Features ・High resolution The 1/2-inch 1.45 million pixels (KP-FD140GV/F140GV), the 1/3-inch 0.8 million pixels (KP-FD83GV/F83GV) and the 1/3- inch 0.33 million pixels (KP-FD33GV/F33GV) square lattices CCD achieve a high resolution. ・Gigabit Ethernet By adoption of Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be possible. Moreover, by using hub or switcher, construction of multiple camera system can be easily performed.

  • Page 14: Section Name And Functions

    Section name and functions Camera / Tripod adaptor mounting screw holes Ethernet connector Lens mount Use for digital video output and （C mount） camera control signal input/ output signal. DC IN/SYNC connector Use for DC+12V power or external trigger /VD signal input. Camera / Tripod adaptor mounting screw holes Camera mounting...

  • Page 15: Optical Filter

    Note: Prior to removing the optical filter, be sure to turn off the power. Since garbage etc. invades into image reception surface camera, please work under the clean air, such as a CLEAN ROOM. * IR cut filter is equipped in the KP-FD140GV/FD83GV/FD33GV. Dummy grass is equipped in the KP-F140GV/F83GV/F33GV.

  • Page 16: Connector

    Connector 1. Ethernet connector LED 1 LED 2 Signal PIN NO. TRP1+ TPR1- TPP2+ TRP3+ TRP3- TRP2- TRP4+ TRP4- Status LED 1 LED 2 Immediately after Power ON Green Light On Yellow Light On 1Gb Transmission Green Light On Yellow Blink On 100Mb Transmission Red Light On Yellow Blink On...

  • Page 17: System Example

    System example KP-FD140GV/F140GV/FD83GV/F83GV/FD33GV/F33GV connect to PC using LAN cable. +12V Camera cable HITACHI JU-F30 LAN cable KP-FD140GV (CAT5E/CAT6) LAN cable PC with NIC (CAT5E/CAT6) HITACHI for Gigabit PoE hub KP-FD140GV (*) Note that following point when connecting the camera (1) Please connect the camera to device for Gigabit Ethernet (1000BASE-T).

  • Page 18: Functions And Operations

    Functions and operations Various mode setup and adjustment of KP-FD140GV/F140GV/FD83GV/F83GV/FD33GV/F33GV are performed by the remote control via Gigabit Ethernet. Operation and adjustment way of function utilized are described below. (Standard) means the function based on GenICam Standard Feature Naming Convention (SFNC) and (Custom) means the original function.
  • Page 19 (3) WIDTH ： Set the actual image width Command name ： Width (Standard) Address ： A0020000 h Values (Factory setting 1280: KP-FD140GV 1360: KP-F140GV 1024: KP-FD83GV/F83GV 652: KP-FD33GV/F33GV) ： 2 to WIDTH MAX Set the actual image width at intervals of 2 pixels.
  • Page 20 Command name ： PixelColorFilter (Standard） Address ： A0020018 h Values (read only) ： 0 "BayerRG" When PixelFormat is BayerRG8/10/12 (KP-FD140GV/FD83GV/FD33GV) 4 "None" Others (9) PARTIAL SCAN ： Setting of the partial scan ・MODE ： Select the mode Command name ： PartialScanMode (Custom）...
  • Page 21 2 "Continuous" The video level is automatically adjusted in the range of 0 to 18dB. *This command is given to priority more than MANUAL GAIN. (5) MANUAL WHITE BALANCE ： Setting of manual white balance *for only KP-FD140GV/FD83GV/FD33GV ・MODE ： Select the mode Command name ：...
  • Page 22 ・VARIABLE1 ： Setting of the Variable shutter 1 Command name ： ExposureTimeAbs (Standard) Address ： A0030044 h Values (Factory setting 33333: KP-FD140GV/F140GV 27777: KP-FD83GV/F83GV 11111: KP-FD33GV/F33GV) ： 10 to 10000000 Set the shutter speed in the range from 1/100000 to 10 second in us.
  • Page 23 ・VARIABLE2 ： Setting of the Variable shutter 2 Command name ： ExposureTimeRaw (Standard) Address ： A0030048 h Values (Factory setting 834 = 342 : KP-FD140GV/F140GV 818 = 332 : KP-FD83GV/F83GV 771 = 303 : KP-FD33GV/F33GV) ： 0 to 1536 Set the shutter speed in the range from 10 to 1/100000 second in 1536 steps.
  • Page 24 (12) MASKING ： Setting of 6 vector independent masking (primary color R G B and complementary color Ye Cy Mg saturation and hue can be separately varied). *for only KP-FD140GV/FD83GV/FD33GV ・MODE ： Select the mode Command name ：...
  • Page 25 ・SELECTOR ： Switch the color doing Paint black Command name ： PaintBlackSelector (Custom） Address ： A0FF0030 h Values (Factory setting 1) ： 1 "Red" Perform the paint black function about Red. 2 "Green" Perform the paint black function about Green. 3 "Blue"...
  • Page 26 Values (Factory setting 0) ： 0 to 4096 Set the following range at intervals. Camera Selector of Trigger Setting range Intervals FrameStart 6.88 to 8196.88 us KP-FD140GV Approx. 2.0us FrameTransferStart 63.2 to 8253.2 us /F140GV VDReset 10.0 to 8120.2 us FrameStart 6.56 to 13110.56 us...
  • Page 27 Timer is stopped at the same time as the end of exposure. 1 to 4096 Set the following range and intervals. Camera Setting range Intervals KP-FD140GV/F140GV from 1.0 to 8190.0 us Approx. 2.0 us KP-FD83GV/F83GV from 1.6 to 13104.0 us Approx. 3.2 us KP-FD33GV/F33GV from 1.6 to 13104.0 us...
  • Page 28 ・TRIGGER SOURCE (related to SELECTOR) ： Select timer trigger source Command name ： TimerTriggerSource (Standard) Address ： A0050020 h Values (Factory setting 0) ： 0 "Off" Timer is stopped at the same time as the end of exposure. 1 "ExposureStart" ・TRIGGER ACTIVATION (related to SELECTOR) ：...
  • Page 29 5. Commands about SAVE/LOAD This product can save settings of 1. 2. 3. 4. to four memories. (1) USER SETS ： Setting of SAVE/LOAD ・SELECTOR ： Select the SAVE/LOAD channel Command name ： UserSetSelector (Standard） Address ： A00A0000 h Values (Factory setting 0) ： 0 "Default" Factory setting 1 "UserSet1"...
  • Page 30 ： "Hitachi_Kokusai_Electric_Inc" (2) MODEL NAME ： Camera name Command name ： DeviceModelName (Standard） Address ： 00000068 h Values (read only) ： "KP-FD140GV": KP-FD140GV "KP-F140GV": KP-F140GV "KP-FD83GV": KP-FD83GV "KP-F83GV": KP-F83GV "KP-FD33GV": KP-FD33GV "KP-F33GV": KP-F33GV (3) MANUFACTURE INFO ： Vendor information Command name ：...

  • Page 31: Frame Rate

    Frame rate Maximum frame rate of KP-FD140GV/F140GV/FD83GV/F83GV/FD33GV/F33GV are decided by Data / pixel Pixel format 8bit RAW 8bit / MONO 8bit 16bit YUV 8bit / RAW 10bit / RAW 12bit / MONO 10bit / MONO 12bit 24bit RGB 8bit / YUV 10bit / YUV 12bit...
  • Page 32 When "PartialScanMode" is "On", number of total line and frame rate can be calculated from following equation using height of grabbing picture. (1) KP-FD140GV/F140GV Total line = 22 + Width + (1048 - Width) / 10 ･･･ omit the figures after the decimal fractions...

  • Page 33: Trigger Mode

    Trigger mode Trigger mode setting of KP-FD140GV/F140GV/FD83GV/F83GV/FD33GV/F33GV are following procedure. 1. Fixed shutter mode When external trigger signal is POSITIVE (TriggerActivation: "RisingEdge"), after the trigger signal rise, exposure is start The exposure time is set by the camera electronic shutter speed.
  • Page 34 3. Reset control The readout timing can be set arbitrary set by using the trigger signal different from the exposure beginning when Fixed shutter mode or ONE trigger mode. Execute following procedure in addition Fixed shutter/ONE trigger settings. (1) TriggerSelector → "FrameTransferStart" (2) TriggerMode →...
  • Page 35 4. Others Following table describe camera behavior according to combination of value of ExposureMode and TriggerMode. Command Actual behavior ExposureMode TriggerMode Normal mode (Normal shutter) Fixed shutter mode Normal mode (Normal shutter) Fixed shutter mode & Reset control Normal mode (Normal shutter) Fixed shutter mode Normal mode (Normal shutter) Fixed shutter mode &...

  • Page 36: Digital Output

    Digital output The method of setting of digital output is explained. 1. Flash out (strobe pulse) This camera can output flash pulse when trigger mode or electric shutter mode, (A) When output flash pulse at the same time as exposure time and without delay. (1) LineSelector →...

  • Page 37: Trigger Operation And Timing Chart

    （High active） Strobe width1 (*2) Data output Strobe width2 (*3) VD output (Low active) KP-FD140GV/F140GV KP-FD83GV/F83GV KP-FD33GV/F33GV (*1) 0.1 to 8190.1us : Approx.2.0us/step 0.1 to 13104.1us : Approx.3.2us/step 0.1 to 13104.1us : Approx. 1.6s/step (*2) 2.0 to 8190.0us : Approx.2.0us/step 3.2 to 13104.0us : Approx.3.2us/step 3.2 to 13104.0us : Approx.
  • Page 38 (High active) Strobe duration1 (*4) Strobe duration2 (*5) Data output VD output (Low active) KP-FD140GV/F140GV KP-FD83GV/F83GV KP-FD33GV/F33GV (*1) T1 = 1 / Self frame rate [second] (*2) 0.25 to 8190.25us : Approx.2.0us/step 6.56 to 13110.56us : Approx.3.2us/step 7.18 to 13111.18us : Approx.1.6s/step (*3) 0.28 to 8190.28us : Approx.2.0us/step...
  • Page 39 Strobe duration1 (*4) Strobe duration2 (*5) Data output Readout delay (*6) VD output (Low active) KP-FD140GV/F140GV KP-FD83GV/F83GV KP-FD33GV/F33GV (*1) T1 = 1 / Self frame rate [second] (*2) 0.25 to 8190.25us : Approx.2.0us/step 6.56 to 13110.56us : Approx.3.2us/step 7.18 to 13111.18us : Approx.1.6s/step (*3) 0.28 to 8190.28us : Approx.2.0us/step...

  • Page 40: Input / Output Signal

    NOTE: If the external VD of cycle which does not match the camera operation mode is input, shutter time has an error. Input / Output signal 1. Input signal The level of the trigger signal input to KP-FD140GV/F140GV/FD83GV/F83GV/FD33GV/F33GV is as follows. High level : +5.0 to +24V Low level 0 to +0.3V...

  • Page 41: Photo Coupler Delay

    Photo coupler delay Photo coupler delay period of KP-FD140GV/F140GV/FD83GV/F83GV/FD33GV/F33GV is different depending on the input voltage. Input voltage When rising When falling 6.36 us 16.10 us 4.58 us 16.32 us 3.68 us 18.72 us 2.97 us 20.16 us 2.67 us 21.56 us...

  • Page 42: Output Sequence Of Raw Data

    Output sequence of RAW data ・KP-FD140GV ・・・ Pixel 1359 1360 ・ ・ ・ 1023 1024 Line ・KP-FD83GV ・・・ Pixel 1023 1024 ・ ・ ・ Line ・KP-FD33GV Pixel ・・・ 651 652 ・ ・ ・ Line...

  • Page 43: Spectral Response

    Spectral response ・KP-FD140GV IR cut filter Wave Length (nm) ・KP-F140GV IR cut filter 1000 Wave Length (nm)
  • Page 44 ・KP-FD83GV IR cut filter Wave Length (nm) ・KP-F83GV IR cut filter 1000 Wave Length (nm)
  • Page 45 ・KP-FD33GV IR cut filter Wave Length (nm) ・KP-F33GV IR cut filter 1000 Wavelength [nm]...

  • Page 46: Specifications

    Specifications Specifications of KP-FD140GV/FD83GV/FD33GV are showing. KP-FD140GV KP-FD83GV KP-FD33GV Imaging device 1/2-inch interline CCD 1/3-inch interline CCD 1/3-inch interline CCD Total pixels 1434 (H) x 1050 (V) 1077 (H) x 788 (V) 692 (H) x 504 (V) Effective pixels 1392 (H) x 1040 (V)
  • Page 47 Specifications of KP-F140GV/F83GV/F33GV are showing. KP-F140GV KP-F83GV KP-F33GV Imaging device 1/2-inch interline CCD 1/1.8-inch interline CCD 1/2-inch interline CCD Total pixels 1434 (H) x 1050 (V) 1077 (H) x 788 (V) 692 (H) x 504 (V) Effective pixels 1392 (H) x 1040 (V) 1034 (H) x 779 (V) 656 (H) x 494 (V) Pixel pitch...

  • Page 48: Dimensions

    Dimensions １３ １４.５...

  • Page 49: About Cd-Rom

    The included control software within CD-ROM operate only in WindowsXP SP2/Windows Vista (32-bit). ② The control software may not operate normal when it is used for the other camera, because software for Hitachi Kokusai Electric Inc's 1CCD GigE Camera. ③...
  • Page 50 Phone: (+1) 416-299-5900, Fax: (+1) 416-299-0450 Eastern Office : 5795 Chemin St. Francois St. Laurent, Quebec H4S 1B6, Canada Phone: (+1) 514-322-6687, Fax: (+1) 514-335-1664 Hitachi Kokusai Electric Europe GmbH URL: http://www.hitachi-ke-eu.com/ Sales and Engineering Frankfurt office : Siemensstr, 9, D-63263 Neu-lsenburg, Germany Phone: +49(0) 6102-8332-0, Fax: +49(0) 6102-202616 Hitachi Kokusai Electric U.K.

This manual is also suitable for:

Kp-fd33gvKp-f140gvKp-fd83gvKp-f83gvKp-f33gv

Table of Contents