Table of Contents
Advertisement
Quick Links
CCD camera
KP-FD140F
KP-FD32F
KP-F140F
KP-F32F
KP-F83F
O p e r a t i o n M a n u a l
Thank you for producing this fine Hitachi Kokusai
Electric CCD camera.
Before using the camera, please read this operation
manual carefully and keep this manual on file for
ready reference in the future.
Hitachi Kokusai Electric
RoHS Compliant
These products compile with the requirement of he
RoHS (Restriction of the use of Certain Hazardous
Substances in Electrical and electronic Equipment)
Directive 2002/95/EC.
Advertisement
Table of Contents
Related Manuals for Hitachi KP-F140F
Summary of Contents for Hitachi KP-F140F
- Page 1 KP-F32F KP-F83F O p e r a t i o n M a n u a l Thank you for producing this fine Hitachi Kokusai Electric CCD camera. Before using the camera, please read this operation manual carefully and keep this manual on file for ready reference in the future.
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the product and the operating instructions should be adhered to. 4. - Page 4 Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a.When the power-supply cord or plug is damaged. b.If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d.If the product does not operate normally by following the operating instructions.
- Page 5 Dieses Erzeugnis sollte nur an der auf dem Typenschild angegebenen Stromversorgungsart betrieben werden. Wenn Sie nicht sicher sind, was für eine Stromversorgung Sie haben, so wenden Sie sich bitte an Ihren Erzeugnishändler oder an das lokale Elektrizitätswerk. Beziehen Sie sich für Batteriebetrieb oder andere Stromquellen vorgesehene Erzeugnisse bitte auf die Bedienungsanleitungen.
- Page 6 2. Conserver ces instructions Conserver les instructions de sécurité et de fonctionnement á des fins de référence ultérieure. 3. Tenir compte des avertissements Tous les avertissements qui figurent sur l’appareil et dans le mode d’emploi devront être respectés. 4. Observer les instructions Observer toutes les instructions de fonctionnement et d’utilisation.
-
Page 7: Important Notice
WARNING Changes modifications not expressly approved by Hitachi Denshi responsible for compliance could void the user’s authority to operate the equipment. provide against harmful... - Page 8 ・ Sop using the camera at the approach of electrical storm (thunder audible). Protect the camera from rain if using it outdoors. ・ In event the camera shows any abnormality, switch off the camera and disconnect the power cord. Contract a Hitachi Denshi service representative.
- Page 9 6. Cleaning ・ Use a blower or a lens brush to remove dusts on the lens or the optical filter. ・ Wipe dirts on the case off with dry soft cloth. If dirks are hardened, wipe them off with cloth moistened with neutral detergent liquid;...
-
Page 10: Table Of Contents
Table of Contents 1. Overview ······································································································································································································ 1 2. Standard Composition ··········································································································································································· 1 3. Features ······································································································································································································· 1 4. System example ······················································································································································································· 1 5. Section name and functions ······························································································································································· 2 6. Connector ··································································································································································································· 2 7. Camera mounting ····················································································································································································· 3 8. Lens ··············································································································································································································· 3 9. -
Page 11: Overview
The KP-FD140F/FD32F are single CCD type RGB color camera which utilized the progressive scan CCD image sensor with square pixel for SXGA/VGA format of 1/2-inch which adopted the RGB primary color mosaic filter. The KP-F140F/F32F are a monochrome CCD camera which utilized the progressive scan CCD image sensor with square pixel for SXGA/VGA format of 1/2-inch. -
Page 12: Section Name And Functions
Section name and functions Camera / Tripod adaptor mounting screw holes Lens mount (C mount) Camera / Tripod adaptor mounting screw holes Connector Signal connection to IEEE1394.b (PORT1/PORT2) TPB- TPB+ TPA- TPA+ TPA (R) TPB (R) Viewer Soft Setting (PORT1/PORT2) SPECIAL DATA SHIELD GND POWER GND... -
Page 13: Camera Mounting
Camera mounting Attached optional accessory the tripod adaptor "TA-FD140", mount the camera to a tripod or mounting bracket. Lens CAUTION Observe the dimensions of the lens mounting selection as illustrated at the right. If the dimensions are not observed, do not use such a lens, because the lens and the camera will be damaged. -
Page 14: Control And States Register (Csr)
Control and States Register KP-FD140F/F140F/FD32F/F32F/F83F can be set by entering predetermined setting commands in the Control and Status register (CSR) of the 1394-based Digital Camera Specification Ver. 1.31. Common and camera-specific CSR register setting operations are described below. Indication example: Function name Function description Lower 32 bits of 64 bit CSR address are displayed. - Page 15 -AUTO- Setting value 83000000 h Gain is automatically adjusted in the range of 0 to 18 dB in response to light source brightness. (5) SHUTTER Sets electronic shutter speed. -OFF- Setting value 80000000 h Switches off shutter operation. *The shutter speed (at OFF) is as follows. ・KP-FD140F/F140F ・KP-FD32F/F32F ・KP-F83F...
- Page 16 (7) GAMMA Gamma correction is adjusted. -OFF- Setting value 80000000h Gamma correction is set to OFF. -Manual adjustment- Setting value 820000xx h Adjust the detail gamma. (8) TRIGGER Sets external trigger operating mode. -OFF- Setting value 80000000h Trigger function set to OFF. -Manual adjustment- Setting value 8xyz0000 h External trigger signal polarity is switched at value x.
- Page 17 (14) CURRENT MEMORY Loading memory channel designating data -LOADBACK UP execute- Setting value x0000000 h 2. Advance CSR 2-1. Image color reproduction and color balance related CSR (1) MASKING RGB and Ye Cy Mg color saturation and hue can be separately varied (6 vector independent masking). Color reproduction detail and fidelity are effectively enhanced.
- Page 18 i) (MASKING) G HUE -Manual adjustment- Setting value 820000xx h j) (MASKING) C HUE -Manual adjustment- Setting value 820000xx h k) (MASKING) B HUE -Manual adjustment- Setting value 820000xx h l) (MASKING) M HUE -Manual adjustment- Setting value 820000xx h (2) PAINT BLACK Color level of R,G, and B can be separately varied.
- Page 19 -OFF- Setting value 80000000 h -ON- Setting value 8xy0000z h Readout signal polarity is switched at value of x. Readout signal source is switched at value of y. When set SourceID7, if z is set to 1, a picture is outputted (and z becomes 0 automatically). (3) TIME STAMP The cycle timer value of 1394 buses can be added to image data as the time stamp.
-
Page 20: Video Format
Video format 1. KP-FD140F/F140F A. Fixed format Format Mode Image Size 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 800 x 600 1024 x 768 1280 x 960... - Page 21 3. KP-FD32F/F32F A. Fixed format Format Mode Image Size 640 x 480 640 x 480 640 x 480 640 x 480 B. Free format （Format7） Format Mode Image Size 656 x 492 656 x 492 656 x 492 656 x 492 656 x 492 656 x 492 656 x 492...
-
Page 22: Trigger Timing Chart
3.2 ms : KP-FD140F (1280 x 960, RGB24, 15fps) 0.9 ms : KP-FD32F (640 x 480, RGB24, 60fps) 3.2 ms : KP-F140F (1280 x 960, Mono8, 15fps) 0.9 ms : KP-F32F (640 x 480, Mono8, 60fps) 0.9 ms : KP-F83F, (1024 x 768, Mono8, 30fps) - Page 23 2. Fixed shutter mode (External trigger operating mode: Mode 0) When external trigger signal is high active, after the trigger signal rise edge, the strobe signal start/end can be set to determine the strobe time. At the strobe signal falling edge, the internal VD signal is reset and the video data are transmitted. More than 10μs High Trigger input...
- Page 24 4. Reset control (External trigger operating mode: Mode 14) When the external trigger signal is HIGH ACTIVE, exposure begins at the rising edge of the trigger signal and ends at the falling edge. At the Readout pulse falling edge, the internal VD signal is reset and the video data are transmitted. Trigger input High (High active)
- Page 25 3.2 ms : KP-FD140F (1280 x 960, RGB24, 15fps) 0.9 ms : KP-FD32F (640 x 480, RGB24, 60fps) 3.2 ms : KP-F140F (1280 x 960, Mono8, 15fps) 0.9 ms : KP-F32F (640 x 480, Mono8, 60fps) 0.9 ms : KP-F83F (1024 x 768, Mono8, 30fps)
-
Page 26: Specifications
RGB primary color mosaic filters (FD140/FD32F) Internal / external (auto selection) IEEE1394.b (FireWire800) IEEE1394-based Digital Camera Specification Version 1.31 compliant 800 / 400 / 200Mbps RGB24 / RGB48 / YUV4:2:2 / RAW8 / RAW１6 for FD140F/FD32F MONO8 / MONO16 for all model... -
Page 27: Dimensions
Dimensions ・ＵＮＩＴ ： ｍｍ ・ＭＡＳＳ ： ＡＰＰＲＯＸ １３０ ｇ ＰＯＷＥＲ/ＳＴＡＴＵＳ ＰＯＲＴ １ ＣＯＬＯＲ：ＢＬＡＣＫ ＶＩＥＷ “Ａ” ±１.５ ４４ ±１ ２２ Ｂ ＶＩＥＷ “Ｂ” ＰＯＲＴ ２ ２－Ｍ３（ＤＥＰＴＨ：３） ＣＯＬＯＲ：ＢＬＡＣＫ ２－Ｍ３（ＤＥＰＴＨ：３） ±１ ±１ １１.５ ３４ （５.７） ２－Ｍ２（ＤＥＰＴＨ：３） ±１.５ ５４ （６） ＣＯＬＯＲ：ＢＬＡＣＫ ±１ ±１ （５.７） １１.５ ３４ ２－Ｍ２（ＤＥＰＴＨ：３） Ａ... -
Page 28: Cd-Rom
Note: The included driver and also demonstration software within CD-ROM operate only in Windows 2000/XP. The viewer software may not operate normal when it is used for the other camera, because software for Hitachi Kokusai Electric. In the case that it stopped normal operating during the use of viewer software, stop viewer software, turn off and on the camera power supply or pull and push the IEEE1394 cable, execute viewer software once again. - Page 29 Beijing Office Beijing Fortune Building 5, Dong San Huan Bei-lu, Chao Yang District, Beijing, 100029 Chaina Phone: +86(0) 10-6590-8755/8756, Fax: +86(0) 10-6590-8757 HITACHI KOKUSAI Electric AMERICA, LTD. Headquarters and : 150 Crossways Park Drive, Woodbury, New York 11797, U.S.A. Northeast Office Phone: (+1) 516-921-7200, Fax: (+1) 516-496-3718 West Office : 371 Van Ness Way, Suite 120 Torrance, CA, 90501, U.S.A.