Displays registered zones and all sensor icons currently connected to Symbio.
Tap an icon to display the pop-up menu and change settings.
Swipe left and right to switch the display.
Notification
5.
Displays notification when received.
Tap to display the notification history.
Rules button
6.
Tap to display the
⇒
Rules Manager Screen
Sensors button
7.
Tap to check/control the status of Z-Wave/ZigBee/Internal sensors, or to display the screen to
add/remove sensors to/from Symbio.
Important
This product does not guarantee connection/function operation with all sensors.
Notes on Z-Wave
This product is a Z-Wave Plus Security Enabled Gateway device in the Central Static Controller
Role type.
When receiving Basic Command, this product ignores it and do nothing, since it is not supported or
mapped to any commands.
Regarding the Z-Wave Web UI with Z-Wave detailed function, refer to the Z-Wave Web UI User
Guide.
If this product is in Z-Wave inclusion controller mode or secondary controller mode, it cannot be
supported in iOS/Android UI. In this case, you must use the Z-Wave Web UI.
Live Video button
8.
Tap to view the real-time image Symbio is monitoring.
⇒
Live Video
History button
9.
Tap to display the
⇒
History Screen
Rules Manager
screen.
History
screen.